A position size calculator tells a trader how large a trade can be so that, if the stop-loss is hit, the loss stays within a set amount or percentage of the account.
For UK traders working with pound-denominated accounts, the best calculators let you enter your account currency, the amount you are prepared to risk, your stop-loss distance and the instrument, then return a trade size in lots or units. The seven tools below all do this, but they differ in where they run, which instruments they cover and how much detail they show.
Position sizing is one of the most important and most overlooked parts of risk management. Many new traders focus on where to enter a trade and spend far less time on how big the trade should be. Yet with leveraged products such as contracts for difference (CFDs) and spread bets, which are widely used in the UK, trade size determines how quickly an account can lose money. A calculator does not remove that risk, but it makes the numbers clear before a trade is placed.
How a position size calculator works
Most calculators use the same underlying formula:
Position size = amount at risk ÷ (stop-loss distance × value per point or pip)
In plain English:
- Decide the amount at risk. Many traders express this as a percentage of their account balance. For example, a trader with a £5,000 account who chooses to risk 1% on a trade is risking £50.
- Set the stop-loss distance. This is the distance between the entry price and the price at which the trade would be closed if the market moved the wrong way, measured in pips or points.
- Find the value per pip or point. This depends on the instrument, the trade size and the account currency. For a pound-denominated account trading a pair quoted in another currency, the calculator converts the value into pounds.
- Divide. The result is the trade size that keeps the potential loss close to the chosen amount, provided the stop-loss is filled at the expected price.
A worked example: a trader with a £5,000 account risks 1% (£50) on a GBP/USD trade with a 25-pip stop-loss. If one pip on a standard lot is worth roughly £8 at the prevailing exchange rate, the calculation is £50 ÷ (25 × £8) = 0.25 lots. The exact answer changes as exchange rates move, which is why calculators that pull live rates are useful.
It is important to remember that stop-loss orders are not guaranteed. In fast-moving markets, or when prices gap at the open, a stop can be filled at a worse price, so the actual loss can exceed the planned amount.
What to look for in a position size calculator
Before comparing tools, it helps to know which features matter most for UK traders:
- Pound sterling support: the calculator should let you set GBP as the account currency so results are shown in pounds.
- Instrument coverage: some tools cover only currency pairs, while others include gold, other commodities and stock indices.
- Live exchange rates: pip values change with exchange rates, so live or regularly updated pricing improves accuracy.
- Clear inputs: account balance, risk percentage or amount, stop-loss in pips or price, and contract size.
- Platform integration: tools that run inside a trading platform can reduce manual errors.
- Transparency: the best calculators show the pip value and the potential loss, not just the final trade size.
How this list was compiled
The seven calculators below were selected because each is free to use, widely referenced by traders and able to calculate trade size from account balance, risk and stop-loss distance. Features were reviewed in November 2026 and may change. The tools are listed in no particular order, and the list does not rank or endorse any of them.
1. VT Markets Position Size Calculator
VT Markets includes a position size calculator among its online trading calculators. Like the other tools on this list, it is designed to turn the amount a trader is prepared to risk and the stop-loss distance into a trade size.
Best suited to: traders who use MetaTrader 4 or MetaTrader 5 and want a calculator from the same provider as their trading account.
Worth knowing: as with any broker tool, results depend on the contract specifications used. Check that the contract size and instrument details match those of the account you actually trade with.
2. Myfxbook Position Size Calculator
Myfxbook, a well-known trading analytics platform, provides a free online position size calculator among its forex calculators. Traders enter their account currency, balance, risk and stop-loss, and the tool calculates the trade size in lots and units.
Best suited to: traders who already use Myfxbook for account tracking or market tools.
Worth knowing: the calculator is focused primarily on currency trading, so traders of other instruments should check coverage.
3. BabyPips Position Size Calculator
BabyPips is a long-running forex education site, and its position size calculator is often used alongside its beginner learning material. It follows the standard formula, showing the amount at risk and the resulting trade size.
Best suited to: beginners who want a simple calculator alongside explanations of pips, lots and leverage.
Worth knowing: its interface is deliberately simple, which is helpful for learning but offers fewer advanced options.
4. EarnForex Position Sizer
The Position Sizer from EarnForex is a free tool that runs inside MetaTrader 4 and MetaTrader 5 as an indicator or expert advisor. Rather than using a separate website, traders can calculate trade size directly on the chart, often by dragging entry and stop-loss lines.
Best suited to: MetaTrader users who want calculations built into their platform.
Worth knowing: because it runs inside the platform, it needs to be installed and configured. Its additional trading functions should be tested carefully on a demo account before use.
5. TradingView Long and Short Position Tools
TradingView’s charting platform includes “Long Position” and “Short Position” drawing tools. When placed on a chart, they show the entry, stop-loss and target, along with the risk and reward based on account size and risk settings entered by the user.
Best suited to: traders who already plan their trades on TradingView charts.
Worth knowing: these tools are primarily for planning and visualisation. Traders should check that the calculated quantity matches how their broker defines contract sizes.
6. Tradingpedia Position Size Calculator
Tradingpedia, a trading education and news site, offers a free online position size calculator. It ties the calculated trade size to the stop-loss distance, so the amount at risk stays consistent even when stop distances change from trade to trade.
Best suited to: traders who want a straightforward web calculator with educational context.
Worth knowing: as with all third-party tools, results should be cross-checked against your broker’s contract specifications.
7. ForexBrokers.com Position Size Calculator
ForexBrokers.com, a broker review site, provides a free calculator that shows trade size alongside related information such as margin requirements and risk-to-reward ratios. The site describes its outputs as educational rather than trading advice.
Best suited to: traders who want to see trade size, margin and risk-to-reward together.
Worth knowing: the margin figures shown may not reflect the specific leverage limits that apply to your account.
Position sizing and UK leverage limits
UK retail traders using CFDs and spread bets are subject to Financial Conduct Authority (FCA) rules that cap leverage on retail accounts. For example, retail leverage on major currency pairs is limited to 30:1, and on gold to 20:1. These limits affect how much margin a position needs, but they do not decide how large a position should be.
That is an important distinction. Leverage determines the minimum deposit needed to open a trade. Position sizing determines how much could be lost if the stop-loss is hit. A trader can stay well within leverage limits and still risk far more than intended on a single trade if the position is too large for the stop-loss distance.
UK traders should also check the FCA Register before opening an account, to confirm whether a firm is authorised to provide services to UK clients and which protections apply.
Spread betting versus CFDs: does position sizing change?
Spread betting is a popular way to trade in the UK. Instead of trading in lots, spread bettors choose a stake per point, such as £2 per point. The principle of position sizing is the same, but the calculation is often simpler:
Stake per point = amount at risk ÷ stop-loss distance in points
For example, a trader risking £50 with a 25-point stop would use a stake of £2 per point. Because the stake is already expressed in pounds, there is no need to convert pip values, although contract details still vary between providers.
With CFDs, trade size is usually expressed in lots or units, and the value of each pip or point depends on the instrument and exchange rates, which is where calculators are most useful.
Common position sizing mistakes
- Choosing the trade size first and the stop-loss second. Setting the stop-loss based on the market, then calculating size from it, keeps risk consistent. Doing it the other way round often leads to stops placed too close.
- Risking a fixed lot size on every trade. The same lot size carries very different risk depending on the stop-loss distance and the instrument.
- Ignoring currency conversion. For pound-denominated accounts, pip values on pairs not quoted in pounds change with exchange rates.
- Forgetting costs. Spreads, commissions and overnight financing are not included in most basic calculators but add to the total cost of a trade.
- Increasing size after losses. Trying to recover losses quickly by trading larger is one of the most common ways small losses become large ones.
- Treating the stop-loss as a guarantee. Gaps and fast markets can lead to fills at worse prices than expected.
How to build position sizing into a routine
A consistent process helps keep position sizing disciplined:
- Set a maximum risk per trade and write it down before trading begins.
- Plan each trade on the chart first, identifying the entry and the stop-loss level based on market structure, not on the amount you want to make.
- Use a calculator to convert the stop-loss distance and risk amount into a trade size.
- Double-check the result against the instrument’s contract specifications and your platform’s order ticket.
- Record the trade in a journal, including planned risk and actual outcome, to spot errors over time.
- Review regularly, looking for trades where actual losses exceeded planned risk and why.
Practising this routine on a demo account before trading with real money can help traders become comfortable with the calculations and platform mechanics.
Frequently asked questions
What is a position size calculator?
A position size calculator works out how large a trade should be based on account balance, the amount or percentage you are willing to risk, and the distance to your stop-loss. It helps keep potential losses within a planned limit.
How much should I risk per trade?
There is no single correct amount, and the decision depends on individual circumstances. Many educational resources discuss risking a small percentage of the account on each trade, but any amount risked on leveraged products can be lost, and losses can exceed the planned amount if stops are not filled at the expected price.
Do position size calculators work for gold?
Many calculators support gold as well as currency pairs. Because gold contract sizes and point values differ from currency pairs, it is important to choose the correct instrument and check the contract specifications.
Does position sizing work the same way for spread betting?
The principle is the same. Spread bettors usually calculate a stake per point by dividing the amount at risk by the stop-loss distance in points.
Can a position size calculator prevent losses?
No. A calculator helps control the size of potential losses, but it cannot prevent them. Leveraged trading carries a high risk of loss regardless of how carefully positions are sized.
Conclusion
Position size calculators turn risk management from guesswork into a clear calculation. Whether you prefer a browser tool, a calculator built into MetaTrader or a charting tool on TradingView, the principle is the same: decide how much you are prepared to lose, set your stop-loss based on the market, and let the trade size follow. For UK traders, setting the account currency to pounds, understanding FCA leverage limits and accounting for gaps and costs make the numbers more realistic. No calculator removes the risk of trading, but using one consistently is one of the simplest habits a trader can build.
Feature image by AlphaTradeZone from Pexels