Spotting suspicious network activity is one thing. Working out exactly what happened is another.
An alert might tell a security operations centre (SOC) that a workstation talked to an unfamiliar server. Was it downloading malware? Moving sensitive files? Or just reaching a legitimate service nobody had come across before?
The alert alone often can’t say. That’s where network forensics tools come in. They let analysts examine traffic, dig into communications between systems and reconstruct activity that would otherwise be hard to explain.
They don’t all go to the same depth, though. Some capture and preserve full packets. Others analyse existing packet captures (PCAPs), rebuild application data or tie network activity to security logs.
What Should SOC Teams Look for in a Network Forensics Tool?
Deep packet analysis helps SOC teams examine network communications beyond basic connection records. However, a good network forensics tool should do more than inspect individual packets.
Here are the key capabilities to look for:
- Full Packet Capture and Retention
- Protocol Decoding and Session Reconstruction
- Searchable Network Metadata
- Correlation with Other Security Data
- Evidence Preservation and Export
Flow records show which systems communicated, when, and how much data was exchanged. Full packet capture preserves more detailed evidence about those communications, including packet contents where available and accessible.
With that in mind, here are ten tools worth comparing.
1. NetWitness: For Enterprise-Scale Network Forensics and SOC Investigations
NetWitness takes a broader approach to network forensics than tools built mainly for inspecting individual PCAP files. It brings together:
- Full packet capture
- Searchable network metadata
- Protocol analysis
- Session reconstruction
This enables analysts to investigate suspicious communications, examine the relevant sessions, and line up network evidence with other security telemetry.
Suppose an attacker used compromised credentials to get into internal systems before opening an external connection. Investigators have to trace those communications, find the affected systems, and work out what the available evidence actually establishes. NetWitness Platform lets analysts:
- Move between metadata-driven investigation and packet-level evidence
- Gain correlation support with logs and endpoint information
NetWitness Platform is built for enterprise SOCs that want integrated network detection, historical investigation and detailed forensic analysis in one place.
2. Wireshark: For Detailed Packet Inspection and Protocol Troubleshooting
Wireshark is still the default for analysts who need to examine packet contents and protocol behaviour in detail. It handles:
- Live capture
- Offline PCAP analysis
- Extensive filtering
- Decoding across hundreds of protocols
If you’re looking at suspicious DNS responses or odd TCP behaviour, you can inspect individual packets and follow the conversation to see what happened.
Its limit in an enterprise SOC is scope. Wireshark is an excellent analysis tool, but it doesn’t give you a centrally managed, enterprise-wide packet retention and investigation platform on its own. It suits SOC analysts, incident responders and network engineers doing detailed protocol work.
3. tcpdump: For Command-Line Packet Capture
Not every investigation starts with a graphical interface. tcpdump lets engineers capture packets from a network interface, apply capture filters and save the traffic for later. It’s especially handy on Linux and Unix systems, or when you’re gathering evidence from a remote server where installing a heavier analysis application isn’t practical. You can then open the capture in Wireshark or another forensic tool.
The trade-off is that tcpdump mostly handles collection and basic inspection. Long-term storage, session indexing, and cross-source investigation need other tools. It fits targeted packet collection, server troubleshooting and incident-response evidence gathering.
4. Arkime: For Large-Scale Packet Capture and Historical Search
Arkime is an open-source network analysis platform for environments where a lot of traffic has to be captured and searched. It indexes detailed session metadata and can keep full packets in standard PCAP format. Investigators search by:
- IP address
- Protocol
- Other extracted fields
And then pull the relevant packet data. That’s useful when a SOC has to look into something that happened days or weeks ago, as long as the data was retained. It also supports distributed deployments and can sit alongside existing SIEM and intrusion detection systems.
Unlike a fully integrated security operations platform, though, broader detection, response, and cross-domain workflows may need extra technology and integration work. Arkime makes sense for high-volume networks that want searchable packet history and a flexible open-source deployment.
5. NetworkMiner: For Extracting Forensic Evidence from Packet Captures
NetworkMiner comes at packet analysis from the evidence side. Instead of making analysts inspect every packet by hand, it pulls out hosts, sessions, transferred files, certificates, and other artefacts from captured traffic. If you suspect a file came down over HTTP, NetworkMiner can help recover it, provided the relevant packets are present and readable. It can also surface credentials sent in cleartext over supported protocols.
Its strength is getting useful evidence out of captures you already have, not providing full enterprise packet collection and monitoring infrastructure. Incident responders going through PCAP files for transferred files, host details, and forensic artefacts will get the most from it.
6. Xplico: For Reconstructing Application Communications
Xplico is an open-source network forensic analysis tool built around rebuilding application data from captured traffic. It supports protocols including:
- HTTP
- SMTP
- IMAP
- POP
- FTP
Investigators thus can recover supported application-level information from captures. That helps when you need to know what happened in a specific email exchange, web session, or file transfer.
Reconstruction only goes as far as the capture allows, though. It depends on how complete the capture is, which protocols are supported, and whether encryption blocks access to the content. Xplico is a specialist’s tool, best for investigations that hinge on rebuilding application sessions.
7. SolarWinds: For Network Flow Analysis and Traffic Visibility
SolarWinds NetFlow Traffic Analyser does a different job from the dedicated packet forensic platforms. It uses flow data from network infrastructure to look at bandwidth consumption, applications, endpoints, and traffic patterns. A SOC can use that to spot unexpected communications, check an unusually large transfer, or narrow down suspicious activity.
Flow records generally don’t keep the application payloads you’d need to reconstruct an attacker’s full conversation, so it’s better seen as a complementary visibility tool than a replacement for historical full packet capture. Network teams watching traffic patterns, bandwidth, and odd communication volumes are its natural audience.
8. ManageEngine: For Flow Monitoring and Network Traffic Investigation
ManageEngine NetFlow Analyser gives you visibility into network activity through flow collection, traffic analysis, and reporting. Teams can use it to look at:
- Conversations between systems
- Find high-traffic applications
- Investigate unusual behavior
It also offers deep packet inspection for application performance monitoring and traffic classification.
Don’t automatically equate that with retaining complete historical PCAP evidence for forensic reconstruction. For a SOC, the distinction matters, because spotting an unusually large transfer isn’t the same as recovering what was in it. It suits organisations that want network traffic monitoring with flow-based security investigation.
9. Splunk: For Correlating Network Evidence with Security Events
Splunk Enterprise Security is mainly a security information and event management (SIEM) and threat investigation platform, not a dedicated packet capture product. Its strength is pulling security information together from different places, including:
- Network devices
- Endpoint tools
- Authentication systems
- Threat intelligence
During an investigation, analysts can line up network alerts with account activity and endpoint events to understand the wider incident.
Packet-level investigation still depends on having suitable network capture data and supporting tools, though. Splunk fits SOCs that need centralised event correlation and investigation across multiple technologies.
10. Elastic Stack (ELK): For Searchable Network and Security Telemetry
The Elastic Stack combines Elasticsearch, Logstash and Kibana for:
- Ingestion
- Search
- Analysis
- Visualisation
Add something like Packetbeat, and teams can collect network transaction information, decode supported application protocols, and analyse the results next to other security telemetry. That flexibility appeals to organisations building their own monitoring and investigation pipelines.
Just remember that collecting decoded network transactions isn’t the same as keeping complete raw packet captures. Full forensic packet retention needs additional capture and storage arrangements. It’s a good fit for security teams building custom network monitoring, search, and analytics workflows.
Final Thoughts
No single network forensics tool fits every investigation.
- Wireshark and tcpdump stay useful for focused packet work.
- Arkime brings serious packet capture and search, while NetworkMiner and Xplico support more specialised evidence analysis.
- For enterprise SOCs that want a more integrated approach, we think NetWitness stands out because it combines packet-level forensics, searchable metadata, session reconstruction and broader security investigation capabilities.
In the end, the right choice is the one that preserves the evidence your analysts need and keeps it within reach when an investigation gets difficult.