Mobile proxy prices resist comparison. One provider leads with $2 per gigabyte. Another asks $67.50 a month. A third wants $90 for 25GB. Put those figures in a spreadsheet, and the cheapest service seems obvious. It isn’t.
The label “mobile proxy” is doing too much work. Sometimes it means access to a large pool of carrier IPs, shared between customers and billed by traffic. Sometimes it means a physical 4G or 5G device reserved for one customer and rented by the day, week or month. Those products solve different problems.
A rotating pool is useful when a job needs many addresses or countries. A dedicated device is better when a login, app test or advertising check must keep returning through the same carrier and city. Get that decision wrong and even a good proxy will feel unreliable.
The prices below were checked on 15 August 2026. They are advertised US-dollar rates, before VAT where applicable. This is a desk comparison of public plans and technical controls, not a claimed laboratory benchmark.
The comparison at a glance
| Provider | What you rent | Cost to start | Coverage | Best suited to | Watch for |
| Proxya | One dedicated physical device | $6.70/day or $67.50/month | 6 countries | Stable accounts, mobile QA, one-city ad checks | Small live stock and limited geography |
| IPRoyal | Dedicated device or rotating pool | $10.11/day dedicated; rotating from $6.80/GB | Global mobile pool | Buyers who need both billing models | Lowest dedicated rate requires a long term |
| DataImpulse | Rotating pool | $5 for 2.5GB, then $2/GB | 16M+ IPs, 195 countries | Low-cost global checks and scraping | Sticky sessions stop at two hours |
| Decodo | Rotating pool | $7.50 for 2GB on the current offer; PAYG $4/GB | 10M+ IPs, 160+ locations | Self-service and broad targeting | Headline rates depend on volume or promotions |
| SOAX | Rotating pool | $90 for 25GB | 33M+ IPs, 195+ locations | Precise city and carrier targeting | High minimum for a small job; no Texas exits |
| Oxylabs | Rotating pool | $30 for 4GB | 140+ countries | Enterprise data collection and long pool sessions | Expensive at low volume |
1. Proxya: a dedicated device at a low flat price
Proxya takes the word “dedicated” literally. An order reserves one physical device, in one place, for one customer. The country, city, carrier and network tier are chosen at checkout. The IP can then change on demand or on a timer, with a five-minute floor imposed by the carrier session.
The rate card starts at $6.70 for a day, $27 for a week and $67.50 for a month. Most locations include 15GB of downloads per day, with the allowance reset daily; a few are uncapped. Connections are available over HTTP(S), SOCKS5, OpenVPN and Xray/VLESS. The network fingerprint can be set to Android, iOS or Windows.
That package is unusually well matched to work that stays in one market. A London team checking a UK mobile campaign can select Three or EE, keep the device for the length of the project and rotate the carrier IP without being moved into a different country. The flat price also works well when one location will carry far more traffic than a per-gigabyte plan makes comfortable. Proxya’s mobile proxy plans display the available devices and current prices.
There is no giant pool behind the offer. Coverage is limited to six countries and popular city-carrier combinations can have only one or two devices left. The mobile product is also younger than the networks run by IPRoyal, SOAX or Oxylabs. If a project needs fifty countries tomorrow, Proxya is the wrong shortlist. If it needs one consistent device at a predictable cost, it is a much closer fit.
Which mobile proxy works for Instagram and OnlyFans?
Instagram and OnlyFans are mobile-first services, but a carrier IP is only one part of an account session. The device profile, browser data, timezone, cookies and ordinary account behaviour still matter. No proxy can turn a policy violation or clumsy automation into legitimate activity.
For authorised creator, agency and QA work, the useful feature is consistency. A dedicated device lets the same account return through the same country, city and carrier instead of borrowing an address from a rotating pool. That removes one large, avoidable variable. It is also why a dedicated mobile proxy generally makes more sense here than a pool designed for scraping thousands of unrelated pages.
That combination is rare among the six providers. HTTP(S) and SOCKS5 cover a browser profile or individual application. OpenVPN can carry a whole workspace. Xray/VLESS is available for a phone, emulator or remote environment that already uses the Xray ecosystem: Xray is the networking core, while VLESS is the lightweight protocol carrying the connection.
OS spoofing deals with a separate signal. Changing a browser’s user agent does not change the way a connection builds TCP packets. A profile may claim to be Android while its network traffic resembles a generic server. TCP/IP stack fingerprinting is the technique used to infer an operating system from packet behaviour.
Use those controls to remove accidental contradictions, not to conceal rule-breaking. Keep authorised accounts mapped to documented devices, avoid unexplained jumps in country or timezone, and follow each platform’s rules.
2. IPRoyal: dedicated hardware and a rotating pool
IPRoyal is the only provider here that makes both sides of the comparison easy to buy from one account. It rents dedicated mobile devices and sells traffic from a rotating pool. That is useful when part of a project needs a steady identity and another part needs breadth.
A dedicated device starts at $10.11 for 24 hours. The 30-day price begins at $130. The advertised $117 monthly rate applies when the device is bought for 90 days, so it is a three-month commitment expressed as a monthly figure. Rotating traffic costs $6.80 per GB at 2GB and falls to $5.20 per GB at 100GB. IPRoyal advertises more than 4.5 million mobile IPs, automatic rotation and manual IP changes.
The service is flexible, but it is not the cheapest dedicated rental or the cheapest rotating pool. Its advantage is having both without a second supplier or integration. The term beside each price deserves more attention than the large number on the card.
3. DataImpulse: a global pool with a $5 entry point
DataImpulse makes the smallest live test easy. Five dollars buys 2.5GB, the standard rate is $2 per GB, country targeting is included, and unused traffic does not expire.
The company advertises more than 16 million mobile IPs across 195 countries. An address can rotate on every request or remain sticky for up to 120 minutes. HTTP(S) and SOCKS5 are supported. For checking ads in several countries, sampling mobile search results or reserving mobile traffic for the few sites that reject residential IPs, the price is hard to ignore.
Sticky does not mean dedicated. A two-hour session is still drawn from a shared pool and it cannot promise the same physical device tomorrow. That is perfectly acceptable for data collection and a poor basis for an account expected to keep one network identity all week.
4. Decodo: the practical middle ground
Decodo, formerly Smartproxy, sells a large pool without making the first integration feel like an infrastructure project. It advertises more than 10 million mobile IPs across 700-plus carriers and over 160 locations, with country, city and ASN targeting. There is a small trial, clear setup material and support for HTTP(S) and SOCKS5.
Its pricing page needs careful reading. At the time of checking, the introductory offer was $7.50 for 2GB, or $3.75 per GB. Pay-as-you-go traffic costs $4 per GB. The widely promoted $2.25 rate belongs to a high-volume tier, not the small plan most first-time buyers will put through checkout.
Decodo is neither the cheapest pool nor the most specialised. Its case is simpler: broad coverage, mature documentation and a dashboard that a small technical team can use without a sales call. Just budget from the checkout total rather than the lowest rate printed anywhere on the page.
5. SOAX: pay for targeting, not for a tiny experiment
SOAX sells precision. Its mobile network covers more than 33 million IPs, with selection by country, region, city and carrier or ISP. Sessions can rotate with each request or stay sticky for up to 60 minutes. A three-day, 400MB test costs $1.99.
The normal entry plan is $90 per month for 25GB, equal to $3.60 per GB. That is reasonable for a team using the allowance and wasteful for somebody who needs 2GB over a weekend. SOAX also excludes Texas exits, which matters more than it sounds when an advertising or retail brief specifies US state coverage.
Choose SOAX when the job is written in terms of cities and carriers and the traffic is regular. For a small general-purpose scrape, the extra controls may simply go unused.
6. Oxylabs: the enterprise option
Oxylabs begins at $30 a month for 4GB. The next plans are $100 for 15GB and $500 for 100GB, with lower unit prices at corporate volume. Coverage spans more than 140 countries and targeting can be narrowed by continent, country, state, city, coordinates and ASN.
Oxylabs brings the extras that procurement teams tend to ask for: HTTP(S), HTTP/3 and SOCKS5, unlimited concurrent sessions, IP whitelisting, usage reporting and static sessions of up to 24 hours. An account manager is included. Those features can justify the premium for a company with reporting needs and several data pipelines.
They do not make 4GB for $30 attractive to a solo buyer. Nor is a 24-hour pool session the same product as a physical device reserved for a month. Oxylabs is easy to defend on an enterprise purchase order and difficult to defend for a one-off account or QA run.
The buying decision in three questions
Do you need the same device tomorrow?
If the answer is yes, shortlist dedicated rentals from Proxya or IPRoyal. If the work collects public pages across many addresses and the session can end after an hour or two, a rotating pool is the natural model.
How many places must the project cover?
Six countries may be enough for a UK, US or Western European brief and useless for global research. Pool providers win on breadth. Dedicated suppliers win when the city, carrier and continuity of one device matter more than the map.
How much traffic will pass through one location?
At 1GB, a $5 DataImpulse order is cheaper than renting hardware. At 100GB through one location, a $67.50 monthly device can cost less than a $2-per-GB pool, assuming the device’s daily allowance and connection speed suit the job. Pool size does not answer that calculation.
One test before committing
Run the smallest available plan against the actual target. Confirm the exit country and carrier. Hold the session for the full workflow. Check the returned page, not only the HTTP status: DataDome and Cloudflare can serve a challenge with a perfectly respectable 200 response. The useful metric is a correct page at the required location, repeated often enough to expose a weak session.
When mobile is the wrong proxy
Mobile should be an escalation tier, not the automatic first purchase. Datacentre IPs are faster and cheaper on tolerant sites. Residential proxies cover many geo-sensitive pages at a lower cost than mobile. A carrier connection earns its premium when the content is mobile-only, the ad is carrier-specific, the target rejects cheaper IP types or the test genuinely needs a cellular identity.
It is also the wrong tool for encrypting every connection on public Wi-Fi. That is a VPN job.
Mobile proxy questions, answered
What is a real-phone mobile proxy?
It is a proxy whose exit traffic passes through physical hardware using a mobile carrier SIM. With a dedicated service, one customer controls that device for the rental term. A rotating pool provides many carrier IPs but usually does not reserve the underlying device.
Is 5G better than 4G for a proxy?
Only when the extra speed is useful, and the local carrier actually delivers it. The reputation signal comes from the carrier address, not the 4G or 5G label. A nearby, stable 4G device is often preferable to a distant 5G exit.
How much should mobile proxies cost?
The rotating pools in this comparison start at $2 per GB. Dedicated real-device rental starts at $6.70 for a day or $67.50 for a month. Light, multi-country work favours per-GB billing. Heavy traffic through one place can favour a flat device rental.
Do Xray/VLESS and OS spoofing replace an antidetect browser?
No. Xray/VLESS controls the route to the proxy, and OS spoofing changes the passive network signature. A browser or device profile controls other signals, including fonts, screen size, timezone, WebGL and cookies. They are separate layers and should not contradict one another.
There is no honest winner without a job description. For a rotating pool, the answer changes with traffic, geography and session length. Write those three requirements down and the shortlist becomes much smaller.
Feature image by Pexels